Download  Print this page

Advertisement

Operator's manual
536LiRX
Please read the operator's manual carefully and make sure you understand the instructions
before using the machine.
E E E E n n n n g g g g l l l l i i i i s s s s h h h h

Advertisement

   Also See for Husqvarna 536LiRX

   Summary of Contents for Husqvarna 536LiRX

  • Page 1

    Operator′s manual 536LiRX Please read the operator’s manual carefully and make sure you understand the instructions before using the machine. E E E E n n n n g g g g l l l l i i i i s s s s h h h h...

  • Page 2: Key To Symbols

    KEY TO SYMBOLS Symbols on the machine: Only use non-metallic, flexible cutting attachments, i.e. trimmer Translation of the original Swedish operating instruction. heads with trimmer line. WARNING! Trimmers can be dangerous! Careless or incorrect use can result in serious or fatal injury to the operator or others.

  • Page 3: Symbols On The Battery And/or On The Battery Charger

    Fail-safe transformer Use and store battery charger only indoors. Double insulation Other symbols/decals on the machine refer to special certification requirements for Husqvarna AB Huskvarna SWEDEN certain markets. Symbols in the operator’s manual: The machine is turned on and off by pressing the on and stop button.

  • Page 4: Table Of Contents

    CONTENTS Contents Note the following before starting: KEY TO SYMBOLS Symbols on the machine: ........2 Please read the operator's manual carefully. Symbols on the battery and/or on the battery charger: ..............3 WARNING! Long-term exposure to noise Symbols in the operator’s manual: ......3 can result in permanent hearing impairment.

  • Page 5: Introduction

    Congratulations on your choice to buy a Husqvarna product! Husqvarna is based on a tradition that dates back to 1689, when the Swedish King Karl XI ordered the construction of a factory on the banks of the Husqvarna River, for production of muskets.

  • Page 6: What Is What

    WHAT IS WHAT? What is what? Trimmer head 17 Power on and warning indicator (ERROR LED) Cutting attachment guard 18 4 mm hex key Shaft 19 Socket spanner Harness Quick release 20 Trimmer head Harness, hip pad 21 Battery release buttons Handle adjustment 22 Battery Handlebar...

  • Page 7: General Safety Precautions

    GENERAL SAFETY PRECAUTIONS General power tool safety • Stay alert, watch what you are doing and use common sense when operating a power tool. Do warnings not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools WARNING! Read all safety warnings and may result in serious personal injury.

  • Page 8: Personal Protective Equipment

    GENERAL SAFETY PRECAUTIONS • Only use the machine in daylight or in other well-lit Personal protective equipment conditions. • Do not overreach. Keep proper footing and balance at IMPORTANT! all times. A lawn trimmer can be dangerous if used incorrectly or •...

  • Page 9: Battery And Battery Charger

    Husqvarna. The batteries are software • Protect the battery from rain and wet conditions. encrypted. Battery charger safety Use only a Husqvarna original BLi battery in your machine. Battery safety Li-ion Li-ion Only use Chargers, Husqvarna QC, for charging the...

  • Page 10: Machine's Safety Equipment

    GENERAL SAFETY PRECAUTIONS • Never carry the battery charger using the cord and Control panel never pull out the plug by pulling the cord. Make sure the machine is switched on or off when the • Keep all cables and extension leads away from water, activate/deactivate button (1) is pressed and held (>1 oil and sharp edges.

  • Page 11

    GENERAL SAFETY PRECAUTIONS Make sure the power trigger is locked when the power Check that the guard is undamaged and not cracked. trigger lock is in its original position. Replace the guard if it has been exposed to impact or is cracked.

  • Page 12: Cutting Equipment

    GENERAL SAFETY PRECAUTIONS When loosening and tightening the saw blade nut, there Grass blades and grass knifes are intended for cutting is a risk of injury from the teeth of the saw blade. You coarse grass. should therefore always ensure that your hand is shielded by the blade guard when doing this.

  • Page 13: Trimmer Head

    GENERAL SAFETY PRECAUTIONS Sharpening grass knifes and grass blades • See the cutting attachment packaging for correct sharpening instructions. • Sharpen all edges equally to maintain the balance of the blade. Trimmer head WARNING! Always use recommended trimmer line. See technical data. Failure to follow this instruction may cause personal injury.

  • Page 14: Assembly

    ASSEMBLY Fitting the handlebar Assembling the guard Li-ion Li-ion Li-ion Li-ion • Fit the correct trimmer guard (A) for use with the • Position the handlebar as shown. Fit the mounting trimmer head. components and tighten the knob lightly. • Hang the trimmer guard on the hook on the plate holder (1).

  • Page 15: Assembly Of Grass Blade And Grass Cutter

    ASSEMBLY Assembly of grass blade and • Fit the nut (G). Tighten the nut to a torque of 35-50 Nm (3.5-5 kpm). Use the socket spanner in the tool kit. grass cutter Grasp the handle of the spanner as close to the trimmer guard as possible.

  • Page 16: Transport Position, Handlebar

    ASSEMBLY Spreading the load on your shoulders Transport position, handlebar A well-adjusted harness and machine makes work much easier. Adjust the harness for the best working position. Li-ion Li-ion Tension the side straps so that the weight is evenly distributed across both shoulders. •...

  • Page 17: Battery Handling

    BATTERY HANDLING Battery Connect the battery to the battery charger Regularly check that the battery charger and the battery The display shows the battery capacity and if there are are intact. See also instructions under the Maintenance any problems with the battery. The battery capacity is heading.

  • Page 18: Transport And Storage

    BATTERY HANDLING Disposal of the battery, battery LED display Charging status charger and machine The battery is 0%-25% LED 1 flashes. charged. Symbols on the product or its packaging indicate that this product cannot be handled as domestic waste. It must The battery is 25%-50% LED 1 is lit, LED 2 flashes.

  • Page 19: Check Before Starting

    Connect battery to the machine Make sure to use fully charged batteries. Use only a Husqvarna original battery in your machine. See technical data. • Insert the battery in the machine. The battery should slide easily into the battery holder on the machine. If the battery does not slide in easily, it is not being •...

  • Page 20: Starting And Stopping

    STARTING AND STOPPING Starting and stopping WARNING! Make sure no unauthorised persons are in the working area. Otherwise there is a risk of serious personal injury. The safety distance is 15 meters. Starting Turn on the machine. Press and hold the start button (>1 sec.) until the green LED is lit.

  • Page 21: Working Techniques

    WORKING TECHNIQUES General working instructions Safety instructions while working • When working with a brush cutter the harness should IMPORTANT! always be worn. Otherwise you will be unable to control the brush cutter safely and this can result in This section takes up the basic safety precautions for injury to yourself or others.

  • Page 22

    WORKING TECHNIQUES Rotation direction WARNING! Neither the operator of the machine nor anyone else may attempt to It is possible to change the rotation direction of the remove the cut material while the motor trimmer head in any position, at full speed or at stop is running or the cutting attachment is postion.

  • Page 23: Grass Clearing Using A Grass Blade

    WORKING TECHNIQUES Grass clearing using a grass blade • The line can easily remove grass and weeds up against walls, fences, trees and borders. However it can also damage sensitive bark on trees and bushes, and damage fence posts. • Reduce the risk of damaging plants by shortening the line to 10-12 cm and reducing the engine speed.

  • Page 24: Maintenance

    MAINTENANCE Inspection and maintenance Trimmer line Check the line by threading it into the hole on the cover, as shown in the illustration. Li-ion Li-ion WARNING! Always remove the battery before any maintenance on the machine. Only use the recommended trimmer heads and trimmer IMPORTANT! Never clean the battery or the battery lines.

  • Page 25: Troubleshooting Schedule

    MAINTENANCE Troubleshooting schedule Keypad Troubleshooting takes place from the keypad. Control panel Possible faults Possible action Low battery voltage. Charging the battery Green activate LED flashing. Identifying the cutting tool Release the throttle The power trigger and the activate Release the power trigger and the button are pressed at the same time.

  • Page 26: Maintenance Schedule

    MAINTENANCE Maintenance schedule Li-ion Li-ion WARNING! Always remove the battery before any maintenance on the machine. The following is a list of the maintenance steps that must be performed on the machine. Most of the items are described in the Maintenance section. The user must only carry out the maintenance and service work described in this Operator's Manual.

  • Page 27: Technical Data

    ) at handles, measured according to ISO 22867, m/s hv,eq Equipped with trimmer head (original), left/right 1,2/0,7 Equipped with grass blade (original), left/right 2,8/1,6 Use only a Husqvarna original BLi battery in your machine. Approved chargers for the specified batteries, BLi. Battery charger QC120 QC330 Mains Voltage, V...

  • Page 28: Ec Declaration Of Conformity

    We, Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel: +46-36-146500, declare that the battery lawn trimmers Husqvarna 536LiRX with serial numbers dating from 2015 onwards (the year is clearly stated on the rating plate, followed by the serial number), comply with the requirements of the COUNCIL’S DIRECTIVE: - of May 17, 2006 ”relating to machinery”...

  • Page 29

    T25B Li-ion Li-ion 6,0 m 10 cm 4" 3,05 m "Clic" 15 cm 6"...

  • Page 32

    1157277-26 ´®z+Y;h¶6?¨ ´®z+Y;h¶6?¨ 2015-05-07...

This manual also for:

536lilx

Comments to this Manuals

Symbols: 0
Latest comments: