Download  Print this page

Husqvarna 236R Operator's Manual: Assembly; Fitting The Main Body; Assembling The Handlebar And Throttle; Connecting Throttle Cable And Stop Switch Wires

Brushcutter.
Hide thumbs

Advertisement

Fitting the main body

Connect the engine (A) to the tube (B) with four screws
(C).
Assembling the handlebar and
throttle
Fit the handlebar in the handlebar clamp on the shaft
using four screws.

ASSEMBLY

Fit the protective sleeve as shown in the diagram.
Connecting throttle cable and
stop switch wires
1
Remove the air filter cover.
2
Insert the throttle cable (A) through the carburettor
bracket (B), then screw the cable adjuster sleeve (C)
into the carburettor bracket fully.
3
Position the slotted fitting (D) on the carburettor so the
recessed hole (E) for the cable lug (F) is away from the
cable adjuster sleeve.
4
Rotate the carburettor throttle cam and slip the throttle
cable through the slot in the slotted fitting, making
sure the cable lug drops into the recessed hole.
5
Operate the throttle trigger a few times to make sure
that it works correctly.
English
65

Advertisement

Chapters

   Also See for Husqvarna 236R

Comments to this Manuals

Symbols: 0
Latest comments: