Download  Print this page

Craftsman 82354 Owner's Manual

Pen multimeter with voltage detector.
Hide thumbs

Advertisement

Owner's Manual
Pen Multimeter
with Voltage Detector
Model No.
82354
CAUTION: Read, understand and
follow Safety Rules and Operating
Instructions in this manual before
using this product.
© Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.
www.craftsman.com
• Safety
• Operation
• Maintenance
• Español
063006

Advertisement

   Also See for Craftsman 82354

   Related Manuals for Craftsman 82354

   Summary of Contents for Craftsman 82354

  • Page 1

    Owner's Manual Pen Multimeter with Voltage Detector Model No. 82354 • Safety CAUTION: Read, understand and • Operation follow Safety Rules and Operating • Maintenance Instructions in this manual before • Español using this product. © Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.

  • Page 2: Table Of Contents

    TABLE OF CONTENTS Warranty Page 3 Safety Instructions Safety Symbols Control and Jacks Symbols and Annunciators Specifications Battery Installation Operating Instructions Non-Contact AC Voltage Detector AC Voltage Measurements DC Voltage Measurements Resistance Measurements Continuity Measurements Diode Test Data Hold MAX Hold Function Button Range Button Auto Power Off...

  • Page 3: Warranty

    ONE YEAR FULL WARRANTY ON CRAFTSMAN PEN MULTIMETER with VOLTAGE DETECTOR If this CRAFTSMAN Pen Multimeter fails to give complete satisfaction within one year from the date of purchase, RETURN IT TO THE NEAREST SEARS STORE OR OTHER CRAFTSMAN OUTLET IN THE UNITED STATES, and Sears will replace it, free of charge.

  • Page 4: Safety Instructions

    SAFETY INSTRUCTIONS This meter has been designed for safe use, but must be operated with caution. The rules listed below must be carefully followed for safe operation. NEVER apply voltage to the meter that exceeds the specified maximum: Input Limits Function Maximum Input V DC or V AC...

  • Page 5: Safety Symbols

    SAFETY SYMBOLS This symbol adjacent to another symbol, terminal or operating device indicates that the operator must refer to an explanation in the Operating Instructions to avoid personal injury or damage to the meter. This symbol advises the user that the 600V terminal(s) so marked must not be connected to a circuit point at which the voltage with...

  • Page 6: Control And Jacks

    CONTROLS AND JACKS 1. Retractive positive test lead 2. Test Lead retracting nut 3. AC voltage detector and warning Light 4. Finger protection barrier 5. Rotary function dial 6. Sensitivity adjustment for AC voltage detector 7. RANGE button 8. FUNCTION button 9.

  • Page 7: Specifications

    SPECIFICATIONS Range Resolution Function Accuracy Non-contact 50 to AC voltage 600V detector DC Voltage 200mV 0.1mV (V DC) 2.000V 1mV ±(0.7% reading + 2 digits) 0.01V 200V 0.1V 600V AC Voltage 200mV 0.1V (V AC) 2.000V 1mV ±(0.8% reading +3 digits (40-400Hz) 0.01V 200V...

  • Page 8: Battery Installation

    Polarity Automatic (no indication for positive readings) Minus (-) sign for negative readings. Measurement Rate 2 times per second, nominal Low Battery Indicator “ ” is displayed to alert battery replacement Batteries Two (2) 1.5V ‘AAA’ batteries Operating Temperature 41ºF to 104ºF (5ºC to 40ºC) Storage Temperature F to 140 F (-20...

  • Page 9: Operating Instructions

    OPERATING INSTRUCTIONS WARNING: Risk of electrocution. High-voltage circuits, both AC and DC, are very dangerous and should be measured with great care. NOTE: On some low AC and DC voltage ranges, with the test leads not connected to a device, the display may show a random, changing reading.

  • Page 10: Ac Voltage Measurements

    AC VOLTAGE MEASUREMENTS WARNING: Risk of Electrocution. The probe tips may not be long enough to contact the live parts inside some 240V outlets for appliances because the contacts are recessed deep in the outlets. As a result, the reading may show 0 volts when the outlet actually has voltage present. Make sure the probe tips are touching the metal contacts inside the outlet before assuming that no voltage is present.

  • Page 11: Resistance Measurements

    RESISTANCE MEASUREMENTS WARNING: To avoid electric shock, disconnect power to the unit under test and discharge all capacitors before taking any resistance measurements. Set the function switch to the Ω position. Use the FUNC button to select the resistance mode Ω. Insert the black test lead banana plug into the negative jack at the bottom of the meter.

  • Page 12: Diode Test

    DIODE TEST Set the function switch to the Ω position. Use the FUNC button to select the diode function Insert the black test lead banana plug into the negative (common) jack at the bottom of the meter. Carefully turn the test lead retracting nut (located at the top of the meter) clockwise to completely draw out the positive test lead probe.

  • Page 13: Maintenance

    MAINTENANCE WARNING: To avoid electric shock, disconnect the test leads from any source of voltage before removing the back cover or the battery cover. WARNING: To avoid electric shock, do not operate your meter until the battery cover is in place and fastened securely. This multimeter is designed to provide years of dependable service, if the following care instructions are performed: 1.

  • Page 14: Battery Replacement

    BATTERY REPLACEMENT WARNING: To avoid electric shock, disconnect the test leads from any source of voltage before removing the battery cover. icon will appear when battery voltage is low. Turn the Function dial to the OFF position. Disconnect the negative (common) test lead from the meter. Fully retract the positive test lead probe.

  • Page 15: Troubleshooting

    1. Purchase “Multitesters and Their Use for Electrical Testing”, (Item No. 82303). 2. Call our Customer Service Line 1-888-326-1006. SERVICE AND PARTS Item Number Description 82354-L Black Test Lead 82354-D Replacement battery cover 82354-CS Rear cover screws For replacement parts shipped directly to your home Call 9 am –...

Comments to this Manuals

Symbols: 0
Latest comments: