Download  Print this page

Mitsubishi Electric FR-F740-00023 Instruction Manual: All Parameter Clear

F700 series.
Hide thumbs

Advertisement

All parameter clear

4.24 All parameter clear
POINT
· Set "1" in ALLC all parameter clear to initialize all parameters. (Parameters are not cleared when "1" is set in Pr.
77 Parameter write selection.)
1.
Screen at powering on
The monitor display appears.
2.
Press
mode.
3.
Press
setting mode.
4.
Turn
clear) appears.
5.
Press
value.
"
"(initial value) appears.
6.
Turn
the setting value " ".
7.
Press
Setting
0
1
and
The inverter is not in the PU operation mode.
1. Press
2. Carry out operation from step 6 again.
262
Operation
to choose the PU operation
to choose the parameter
until
(all parameter
to read the present set
to change it to
to set.
· Press
to read another parameter.
· Press
to show the setting again.
· Press
twice to show the next parameter.
Not executed.
All parameters return to the initial values. Refer to the list of parameters on page 322 for
availability of parameter clear.
are displayed alternately ... Why?
.
is lit and the monitor (4 digit LED) displays "0" (Pr. 79 = "0" (initial value)).
Display
PU indication is lit.
Flicker ··· Parameter setting complete!!
Description
The parameter
number read
previously appears.

Advertisement

Comments to this Manuals

Symbols: 0
Latest comments: