Download Print this page

Mitsubishi Electric FR-F740-00023 Instruction Manual: Parameter Clear

F700 series.
Hide thumbs

Advertisement

4.23 Parameter clear

POINT
· Set "1" in Pr. CL parameter clear to initialize parameters. (Parameters are not cleared when "1" is set in Pr. 77
Parameter write selection. In addition, calibration parameters are not cleared.)
1.
Screen at powering on
The monitor display appears.
2.
Press
mode.
3.
Press
setting mode.
4.
Turn
until "
appears.
5.
Press
"
"(initial value) appears.
6.
Turn
to change it to
the setting value " ".
7.
Press
Setting
0
Not executed.
Returns all parameters to the initial values except for calibration parameters, terminal function selection
1
parameters, etc.
Refer to the list of parameters on page 322 for availability of parameter clear.
and
The inverter is not in the PU operation mode.
1. Press
2. Carry out operation from step 6 again.
Operation
to choose the PU operation
to choose the parameter
" (parameter clear)
to read the present set value.
to set.
· Turn
to read another parameter.
· Press
to show the setting again.
· Press
twice to show the next parameter.
are displayed alternately ... Why?
.
is lit and the monitor (4 digit LED) displays "0" (Pr. 79 = "0" (initial value)).
Display
PU indication is lit.
The parameter
number read
previously appears.
Flicker ··· Parameter setting complete!!
Description
Parameter clear
261
4

Advertisement

Comments to this Manuals

Symbols: 0
Latest comments: