Download  Print this page

Mitsubishi Electric FR-F740-00023 Instruction Manual: Useful Functions; Cooling Fan Operation Selection (pr)

F700 series.
Hide thumbs

Advertisement

Useful functions

4.21 Useful functions
Purpose
Increase cooling fan life
To determine the maintenance time
of parts.
Freely available parameter
4.21.1 Cooling fan operation selection (Pr. 244)
You can control the operation of the cooling fan (00083 or more) built in the inverter.
Parameter
Number
244
Cooling fan operation selection
The above parameters can be set when Pr. 160 User group read selection = "0". (
In either of the following cases, fan operation is regarded as faulty, [FN] is shown on the operation panel, and the fan
alarm output (FAN) and alarm (LF) signals are output.
Pr. 244 = "0"
When the fan comes to a stop with power on.
Pr. 244 = "1"
When the fan stops during the fan ON command while the inverter is running.
For the terminal used for the FAN signal output, set "25" (positive logic) or "125" (negative logic) in any of Pr. 190 to
Pr. 196 (output terminal function selection), and for the LF signal, set "98" (positive logic) or "198" (negative logic).
CAUTION
Changing the terminal assignment using Pr. 190 to Pr. 196 (output terminal function selection) may affect the other functions.
Please make setting after confirming the function of each terminal.
Parameters referred to
Pr. 190 to Pr. 196 (output terminal function selection)
250
Cooling fan operation selection
Inverter part life display
Maintenance output function
Current average value monitor
signal
Free parameter
Name
Initial Value
Refer to page 116
Parameter that must be Set
Setting Range
0
1
1
Refer to page
173)
Pr. 244
Pr. 255 to Pr. 259
Pr. 503, Pr. 504
Pr. 555 to Pr. 557
Pr. 888, Pr. 889
Description
Operates at power on
Cooling fan on/off control invalid (The
cooling fan is always on at power on)
Cooling fan on/off control valid
The fan is always on while the inverter is
running. During a stop, the inverter status
is monitored and the fan switches on-off
according to the temperature.
Refer to
Page
250
251
254
255
257

Advertisement

Comments to this Manuals

Symbols: 0
Latest comments: