Download  Print this page

Advertisement

(b) Method to adjust any point without application of a voltage (current) to across terminals 2-5(4-5).
(To change from 4V (80%) to 5V (100%))
Operation
1.
Confirm the RUN indication and operation
mode indication
The inverter must be at a stop.
The inverter must be in the PU operation
mode.(Using
2.
Press
to choose the parameter
setting mode.
3.
Turn
until
4.
Press
to read the present set value.
"
" (initial value) appears.
5.
Turn
to change it to the setting value
of "
".
6.
Press
to set.
7.
Turn
until
8.
Press
to display
9.
Turn
until
appears. Set to C4 Terminal 2 frequency
setting gain.
10.
Press
to display the analog voltage
(current) value (%).
11.
Turn
to set the gain voltage (%).
"0V (0mA) equals to 0%, 5V (10V, 20mA) to
100%"
REMARKS
The current setting at the instant of
turning
is displayed.
12.
Press
to set.
REMARKS
By pressing
after step 10, you can confirm the current frequency setting bias/gain setting.
It cannot be confirmed after execution of step 11.
)
appears.
Flicker...Parameter setting complete!!
appears.
.
(
)
Flicker...Parameter setting complete!!
By turning
, you can read another parameter.
Press
to return to the
Press
twice to show the next parameter (
Frequency setting by analog input (terminal 1, 2, 4)
Display
The parameter
number read
previously appears.
C0 to C7 setting
is enabled.
Terminal 2 input Terminal 4 input
Analog voltage (current)
value (%) across terminals 2-5
(across terminals 4-5)
The gain frequency is
reached when the analog
voltage (current) value across
terminals 2-5 (across terminals
4-5) is 100%.
Terminal 2 input Terminal 4 input
(Adjustment completed)
indication (step 8).
).
4
165

Advertisement

Comments to this Manuals

Symbols: 0
Latest comments: