Download  Print this page

Husqvarna PG680 Operator's Manual Page 18

Husqvarna grinder operator's manual.
Hide thumbs

Advertisement

Full and half sets of diamonds
By changing the way the diamonds are set-up on the
diamond holder discs, an operator can signifi cantly ef-
fect the performance of the machine and therefore, the
fi nished product.
HALF-SET OF DIAMONDS
When the diamonds are set-up as a half-set, they tend
to follow the surface of the fl oor. Similar to a tripod for a
camera, which can be placed on an uneven surface and
yet still fi nd a stable footing.
The half-set diamond confi guration should only be used
when a fl at fl oor fi nish is not required.
FULL-SET OF DIAMONDS
When the diamonds are set-up as a full-set, they tend
not to follow the surface of the fl oor. If the fl oor has undu-
lations, the machine will grind the high areas yet miss
the low spots (unless the high areas are ground down
fi rst).
The full-set diamond confi guration should be used when
a fl at fl oor fi nish is desired.
The below table gives some examples of possible ap-
plications for the two arrangements:
Application
Ceramic tile adhesive removal
Carpet glue removal
Epoxy paint removal
Vinyl adhesive removal
Rain damaged concrete
Smoothen exposed aggregate
Lippage removal in terrazzo/stone tiles
Surface polishing of concrete fl oors
Grinding to expose aggregate in concrete polishing application
Remove lippage from terrazzo/natural stone tiles
Flatten undulations in concrete fl oors
Re-polish fl oors that have been ground before
20
- English
Diamond selection
Full set is best
Half set is best
X
X
X
X
X
X
X
X
X
X
X
X

Advertisement

Troubleshooting

   Related Manuals for Husqvarna PG680

This manual also for:

Pg820

Comments to this Manuals

Symbols: 0
Latest comments: