Download  Print this page
   

Advertisement

Installation
Tools
Necessery:
1 PrepareTheInstallation Site
Your counter-depthrefrigeratoris designedto be part of a built-inkitchen cabinet
system. Be sureto coordinatesite preparationand instaflation with your kitchen
contractor.
Includethese minimumguidelinesin yoursite preparation:
, Choosea placenear a groundedelectricaloutlet.
, Do not use an extensioncord or an adapterplug.
, Avoid direct sunlightand closeproximityto a range, dishwasheror other
heatsource.
, Floorshould be leveland able 10supporta fully loadedrefrigerator.
, The refrigerator'sIce& Water Dispenserrequireswater supplyaccess.
, Planfor easy accessto countertops whenremovingfood.
, Forcompleteaccessto drawers andfreezer baskets,doorsmust be able to
fully open.
Allow the following clearancesfor ease of installation,proper air circulation,and
plumbingand electricalconnections:
Sides& Top:3/8 inch
Rear: 1 inch
2 TransportUnpackagedRefrigeratorTo Site
By now,you have already removedyour refrigerator'sshippingcarton.Youmay
still needto use a handtruck to move it throughclose spacesor entrances.If the
refrigeratoris larger than an entrance,considertwo options:
, Removethe entrancedoor if oneexists.
, Removethe refrigeratordoors(see how in your Use& Care Guide).
When usinga handtruck:
, Loadrefrigeratorfrom side of cabinetonly.
, Do not run retainingstraps over handles.
, Do not over-tightenretaining straps.
, Neveruse refrigeratorhandlesto movethe refrigerator.
, Removetape from doors only after unit is in place.
3 ConnectWaterSupply
What you will need:
, Accessto a cold water line
with pressureof
20-100psi.
1
, Coppertubing with ¼-inch
(6.4mm)OD. Lengthfor thi_
Waterline hooku
tubing is the distancefrom
the rear of the refrigeratorto your household
water supply line plus 7 feet (2.1 meters).
, A shut-offvalvefor the connectionbetweenyour household
water line and the refrigeratorsupply line.
Do not use a self-piercingshut-offvalve.
, A compressionnut andferrule (sleeve)for the water supply
connectionat the rearof your refrigerator.
Side-By-Side
_e[F_geFatoF
This document should only be removedby customerafter installation.
Turn
to
other
sides
for
To connectthe water supplyto the rear of your refrigerator:
1 Ensurethat the refrigeratoris not pluggedin.
2 Flushthe supplyline until water is clear by placingthe end of the
coppertube in a sinkor bucketand openingthe shut-offvalve.
3 Unscrewthe plasticcap from thewater valveinlet at the rear of
your refrigerator.Discardthe cap.
4 Slidethe brass compressionnut, thenthe ferrule (sleeve)onto
coppertube.
5 Pushthe coppertube into water valveinlet as far as it willgo
(1/4 inch).
6 Slidethe ferrule (sleeve)into valve andfinger-tightenthe
compressionnut ontovalve. Tightenanotherhalf turn with a
wrench. Do not over-tighten.
7 Securethe coppertube to your refrigerator'srearpanel with a
steel clamp andscrew (seeillustration).
8 Coilthe excesscoppertubing (about2_A turns) behind your
refrigeratoras shown. Arrangecoiled tubing to avoid vibrationor
wear againstother surfaces.
9 Openwater supply shut-offvalveand tighten any connections
that leak.
4 Placein Permanent Position
If possible,use a handtruck to positionthe refrigeratordirectly infront of
its cabinetenclosure.
Becareful not to move the refrigeratorbeyond its water supply (copper
tubing) connections.
Plug inthe powercord, and push the refrigeratorstraightback into
place.
5 Level Refrigerator& Adjust Doors (ifnecessary)
Guidelinesfor final positioningof yourrefrigerator:
• All four cornersof the cabinetmust rest firmly
on the floor.
• The cabinetshouldbe levelat the front and rear.
• The sidesshouldtilt _A-inch (6 ram)from front to back
(to ensurethat doorscloseand seal properly).
• Doorsshouldalign witheach other and be level.
All of these conditionscan be met by raisingor loweringthe
adjustablefront rollers.
To adjust the front rollers:
1 Openboth doorsand removethe toe grille by
unscrewingits two mountingscrews andgently pulling
forward(see illustration).
2 Closethe doors anduse a flat-bladescrewdriveror 3/
8-inch socket wrenchto raiseor lowerthe front rollers.
3 Ensureboth doorsare bind-freewith their seals
touchingthe cabineton all four sides.
4 Replacethe toe grilleby fitting it into place and
refasteningits mountingscrews.
Spanish
8
French.
RemoveInternalShippingMaterials
Electroluxuses packingfoam and tapeto securethe internalpartsof yourrefrigeratorfor shipping.Oncethe
refrigeratoris in position,you can removethis material.
1 PIECE OF TAPEi
1 PIECE OF TAPE_
__
_
=__
1 PIECE OF TAPE_
_
_
1 PIECE OF TAPE_
_
I=I=--
i...--JI
=
PIECE OF TAPE OR
2 BLUE SHiPPiNG CLIPS
SPACER WITH TOE GRILLE
PIECE OF TAPE
BOX WITH DOOR BINS AND
DAIRY COMPARTMENT
PIECE OF TAPE
Your refrigeratorincludesan ice &
water dispensingsystem,a digital
temperaturecontrolsystem,
controlsto monitorthe status of a
water filter, and controlsfor storage
drawerhumidity and temperature.
Seethe Use & Care Guideto
learnmore aboutthe start-up
settings for these controls.
7 Checkinitial SystemSettings
_
igital
Control
Panel
Problems?TryTheseSuggestions
Operationproblemsare possibleif any of the installationtasksare notcompleted. Here is a list of thingsto check
for:
• Isthe refrigerator'spower cord pluggedin?
• Isthe refrigeratorconnectedto the householdwater supply?
• If you hadto removethe refrigeratorand freezerdoors, didyou reattachwater and power connectorsat the
door hinges?(See the Use& Care Guidefor detailedinstructionson removingand replacingdoors.)
• Isthe ice makerpower switchturnedOn?
Otherpossibilitiesto check:
• Isthe powerto the receptacleturnedon?
• Isthe water filter abovethe fresh foodcompartmentfullyseated (see Use& Care Guidefor details)?
If you still have operationproblemsafter checkingthese suggestions,pleasesee the 'SolutionsTo Common
Problems"section in your Use& Care Guide.
9 What's Next?
Congratulations. Y ouare readyto begin enjoying your new Electroluxrefrigerator.
• To becomeaware of importantsafetyinstructionsand learn how to operateyour refrigerator,pleaseread the
entire Use & Care Guide.
• Y_umaywantt_startwiththe`N_rma_erat_ngSights&S_unds_sect_n_ftheGuidet_earnm_reab_ut
what to expectduringtypicaloperation.
• Pleaseregisteryour product.Youcan use the CD that came with your refrigeratorto registeronline,or you
can simplysend inthe RegistrationCard.
And thank you for choosing
Electrolux.
Not satisfied with the installationof your refrigerator? [> Pleasecontact t he storeyoupurchased it from.
g4, 4o2o,

Advertisement

   Also See for Electrolux E23CS78HSS3

   Related Manuals for Electrolux E23CS78HSS3

   Summary of Contents for Electrolux E23CS78HSS3

  • Page 1

    , A compressionnut andferrule (sleeve)for the water supply can simplysend inthe RegistrationCard. connectionat the rearof your refrigerator. And thank you for choosing Electrolux. Not satisfied with the installationof your refrigerator? [> Pleasecontact t he storeyoupurchased it from. g4, 4o2o,...

  • Page 2

    Una tuerca de compresi6n y guarnicion (manguito) Vuelva a colocar la rejilla inferior acomodandola en su Le agradecemospor haber prefeddoun producto Electrolux. para la conexi6n del suministro de agua en la parte lugar y sujetandola con sus tornillos de montaje trasera...

  • Page 3

    2 Placez I'extremite de la conduite en cuivre dans un evier ou un ree_i_r_r'° Electrolux utilise de la mousse d'emballage et du ruban pour fixer les pieces internes du refrigerateur Iors de I'expedifion Une fob seau et ouvrez le robinet...

This manual also for:

E23cs78hps3E23cs78hss2E23cs75dssgE23cs78hps2E23cs75dsshE23cs78hps1 ... Show all

Comments to this Manuals

Symbols: 0
Latest comments: