Download Print this page

Advertisement

Oper ator's manual (EPA)
326RJ
X-series
Please r ead the operator's manual carefully and make sure you
E E E E n n n n g g g g l l l l i i i i s s s s h h h h
understand the instructions before using the machine.

Advertisement

   Related Manuals for Husqvarna 326RJX Series

   Summary of Contents for Husqvarna 326RJX Series

  • Page 1

    Oper ator’s manual (EPA) 326RJ X-series Please r ead the operator’s manual carefully and make sure you E E E E n n n n g g g g l l l l i i i i s s s s h h h h understand the instructions before using the machine.

  • Page 2: Key To Symbols

    KEY TO SYMBOLS Symbols WARNING! Clearing saws, brushcutters Only intended for trimmer heads. and trimmers can be dangerous! Careless or incorrect use can result in serious or fatal injury to the operator or others. It is extremely important that you read and understand the contents of the operator’s manual.

  • Page 3: Table Of Contents

    CONTENTS Contents Note the following before starting: KEY TO SYMBOLS Please read the operator’s manual carefully. Symbols ............... Maintenance, replacement, or repair of the emission control CONTENTS devices and system may be performed by any nonroad Contents ..............engine repair establishment or individual. Note the following before starting: ........

  • Page 4: Introduction

    Dear customer! Congratulations on your choice to buy a Husqvarna product! Husqvarna is based on a tradition that dates back to 1689, when the Swedish King Karl XI ordered the construction of a factory on the banks of the Huskvarna River, for production of muskets. The location was logical, since water power was harnessed from the Huskvarna River to create the water-powered plant.

  • Page 5: What Is What

    WHAT IS WHAT? What is what on the trimmer? 1 Trimmer head 16 Handle adjustment 2 Grease filler cap, bevel gear 17 Locking nut 3 Bevel gear 18 Support flange 4 Cutting attachment guard 19 Drive disc 5 Shaft 20 Socket spanner 6 Loop handle 21 Operator’s manual 7 Throttle control...

  • Page 6: General Safety Precautions

    GENERAL SAFETY PRECAUTIONS Important Personal protective equipment IMPORTANT! IMPORTANT! The machine is only designed for trimming grass. A clearing saw, brushcutter or trimmer can be dangerous if used incorrectly or carelessly, and can cause serious or The only accessories you can operate with this engine unit fatal injury to the operator or others.

  • Page 7: Machine's Safety Equipment

    GENERAL SAFETY PRECAUTIONS CLOTHING Make sure the throttle control is locked at the idle setting when the throttle lockout is released. Wear clothes made of a strong fabric and avoid loose clothing that can catch on twigs and branches. Always wear heavy, long pants.

  • Page 8

    GENERAL SAFETY PRECAUTIONS Cutting attachment guard Check that the vibration damping element is undamaged and securely attached. WARNING! Overexposure to vibration can lead to circulatory damage or nerve damage This guard is intended to prevent loose objects from being in people who have impaired circulation. thrown towards the operator.

  • Page 9: Cutting Equipment

    GENERAL SAFETY PRECAUTIONS Cutting equipment If the muffler on your machine is fitted with a spark arrestor screen this must be cleaned regularly. A blocked screen will cause the engine to overheat and may lead to serious This section describes how to choose and maintain your damage.

  • Page 10: Sharpening Grass Cutters And Grass Blades

    GENERAL SAFETY PRECAUTIONS Trimmer head General rules IMPORTANT! Always ensure the trimmer cord is wound tightly and evenly Only use cutting attachments with the guards we around the drum, otherwise the machine will generate recommend! See the chapter on Technical data. harmful vibration.

  • Page 11: Assembly

    ASSEMBLY Fitting the J-handle Assembling the cutting equipment • Clip the loop handle onto the shaft. Note that the loop handle must be fitted between the arrows on the shaft. WARNING! When fitting the cutting attachment it is extremely important that the raised section on the drive disc/support flange engages correctly in the centre hole of the cutting attachment.

  • Page 12: Fitting The Blade Guard/combination Guard, Grass Blade And Grass Cutter

    ASSEMBLY • Insert a finger into the centre hole of the cover (I) while • Fit the nut (G). The nut must be tightened to a torque of grasping the cover with your other fingers. Using the index 35-50 Nm (3.5-5 kpm). Use the socket spanner in the tool finger and thumb of your other hand, release the two kit.

  • Page 13: Fuel Handling

    • In order to prevent unintentional starting of the engine, the • For best results and performance use HUSQVARNA two- spark plug cap must always be removed during long-term stroke engine oil, which is specially formulated for our air- storage, if the machine is not under close supervision and cooled two stroke-engines.

  • Page 14: Fueling

    FUEL HANDLING Mixing Fueling • Always mix the gasoline and oil in a clean container intended for fuel. • Always start by filling half the amount of the gasoline to be used. Then add the entire amount of oil. Mix (shake) the fuel mixture.

  • Page 15: Starting And Stopping

    STARTING AND STOPPING Check before starting Starting and stopping • Check the blade to ensure that no cracks have formed at the bottom of the teeth or by the centre hole. The most WARNING! The complete clutch cover and common reason why cracks are formed is that sharp shaft must be fitted before the machine is corners have been formed at the bottom of the teeth while started, otherwise the clutch can come loose...

  • Page 16

    STARTING AND STOPPING CAUTION! Do not pull the starter cord all the way out and do not let go of the starter handle when the cord is fully extended. This can damage the machine. CAUTION! Do not put any part of your body in marked area. Contact can result in burns to the skin, or electrical shock if the spark plug cap has been damaged.

  • Page 17: Working Techniques

    WORKING TECHNIQUES General working instructions 6 Always hold the machine with both hands. Hold the machine on the right side of your body. IMPORTANT! This section describes the basic safety precautions for working with clearing saws and trimmers. If you encounter a situation where you are uncertain how to proceed you should ask an expert.

  • Page 18: Grass Trimming With A Trimmer Head

    WORKING TECHNIQUES Grass trimming with a trimmer head WARNING! Machines fitted with saw blades or grass blades can be thrown violently to the side when the blade comes into contact with a fixed object. This is called blade thrust. A blade thrust can be violent enough Trimming to cause the machine and/or operator to be propelled in any direction, and possibly lose...

  • Page 19

    WORKING TECHNIQUES Sweeping • The fan effect of the rotating cord can be used for quick and easy clearing up. Hold the cord parallel to and above the area to be swept and move the tool to and fro. • When cutting and sweeping you should use full throttle to obtain the best results.

  • Page 20: Maintenance

    CAUTION! If the cutting attachment rotates when the engine is idling the idle adjustment screw T should be turned anti- clockwise until the cutting attachment stops. Your Husqvarna product has been designed and manufactured to specifications that reduce harmful Rec. idle speed 2700 rpm emissions.

  • Page 21: Muffler

    MAINTENANCE Correctly adjusted carburetor will run smoothly in every position. The idle speed should also be well below the speed at which the cutting attachment starts When the carburetor is correctly adjusted the machine will to rotate. accelerate without hesitation and burble a little at maximum speed.

  • Page 22: Cooling System

    A dirty air filter. These factors cause deposits on the spark plug electrodes, Always use HUSQVARNA filter oil, art. no. 531 00 92-48. The which may result in operating problems and starting filter oil contains a solvent to make it spread evenly through difficulties.

  • Page 23: Bevel Gear

    The grease in the bevel gear does not normally need to be changed except if repairs are carried out. CAUTION! Use only HUSQVARNA replacement parts. Use of other brands of replacement parts can cause damage to your unit or injury to the operator or others. Your warranty does not cover damage or liability caused by the use of accessories and/or attachments not specifically...

  • Page 24: Maintenance Schedule

    MAINTENANCE Maintenance schedule The following is a list of the maintenance that must be performed on the machine. Most of the items are described in the Maintenance section. The user must only carry out the maintenance and service work described in this manual. More extensive work must be carried out by an authorised service workshop.

  • Page 25: Technical Data

    TECHNICAL DATA Technical data 326RJX Engine Cylinder displacement, cu.in/cm 1,50/24,5 Cylinder bore, inch/mm 1,34/34,0 Stroke, inch/mm 1,06/27 Idle speed, rpm 2700 Recommended max. fast idle speed, rpm 11000-11700 Speed of output shaft, rpm 8014 Max. engine output, acc. to ISO 8893 0,9/8400 Catalytic converter muffler...

  • Page 26: Federal And California Emissions Control Warranty Statement

    COVERAGE scheduled replacement, the part will be repaired or replaced by Husqvarna Forest & Garden at no cost. Any such part The emissions control system is warranted for two years. If repaired or replaced under warranty is warranted for the any emissions-related part on your equipment is defective, remainder of the period prior to the first scheduled...

  • Page 27

    EPA may not be used. The use of any non-exempted add-on or modified parts will be grounds for disallowing a warranty claim. Husqvarna Forest & Garden will not be liable to warrant failures of warranted parts caused by the use of a non- exempted add-on or modified part.

  • Page 28

    Super Auto II Super Auto II 1 " 4,0 m 15 cm ~2,0 m 6 " 6,5 ' 15 cm 6 " 1151472-95 Rev. 1 2009-01-16...

  • Page 29

    1151472-95 Rev. 1 2009-01-16...

  • Page 30

    Trimmy H II 15 cm 6" 7,5 m ~ 3,7 m 15 cm 6" 1151472-95 Rev. 1 2009-01-16...

  • Page 31

    Trimmy Hit “Click” 7,0 m 12 cm 5" ~ 3,5 m “Click” ~ 15 cm " 15 cm 6 " 1151472-95 Rev. 1 2009-01-16...

  • Page 32

    Trimmy Hit Pro 7,5 m 15 cm 6" ~ 3,7 m 15 cm 6" 15 cm “Click” 6" 1151472-95 Rev. 1 2009-01-16...

  • Page 33

    8,5 m 10 cm 4" 4,2 m "Clic" 15 cm 6" 1151472-95 Rev. 1 2009-01-16...

  • Page 34

    4,25 m 4,25 m 15 cm 6" 15 cm 6" ´®z+RN[¶5,¨ ´®z+RN[¶5,¨ 1151472-95 Rev. 1 2009-01-16...

  • Page 35

    T35, T35x 8,5 m 10 cm 4" 4,3 m "Clic" 15 cm 6" 1151472-95 Rev. 1 2009-01-16...

  • Page 36

    1151472-95 ´®z+SO=¶5O¨ ´®z+SO=¶5O¨ 2009-01-20...

Comments to this Manuals

Symbols: 0
Latest comments: