General Precautions (continued)
of the grinding
use only the types of coffee
in this manual.
the drip tray before closing the front panel door. Closing
panel door without
the drip tray removed
parts of the coffee
To prevent clogging
of the internal
parts, use only filtered
water as specified
Do not used distilled water.
Do not put any part of your coffee
maker in a dishwasher.
Many of the parts
are not dishwasher
Keep the coffee maker
keys in a safe place.
keys are not
by the warranty.
Clean the coffee
to the chart below. See the
Care and Cleaning
your coffee maker for the first time...
1) Make sure you are using the right type of water.
Call your local water company. Ask them for the water hardness level of the water
supplied to the building where your coffee maker will be installed.
If the water hardness level is above four grains per gallon (4 gpg):
>> For model E24CM76GSS,
contact a water treatment specialist and have a water
treatment system installed to reduce the water hardness level to 4 gpg or less
according the installation instructions.
>> For model E24CM75GSS,
pour only filtered water with a hardness level of 4 gpg or
less into the water tank. Do not use distilled water.
2) Flush the system to remove bacteria that may have accumulated
during storage and
shipping (See page 39).
For model E24CM76GSS,
regardless of the water hardness
measured, Electrolux highly recommends installation of the Electrolux filter kit. The
coffee maker requires periodic decalcification.
Decalcification will be much simpler
with the filter kit installed according to the installation instructions.
Coffee Maker Cleaning
Every 30 cycles