Download  Print this page

Advertisement

Care & Cleaning
39
,
.
5.
6.
.
.
Pour a packet of Puly Decalcifying
Powder
into a 16 ounce
bottle. Fill the
bottle with warm filtered water and shake well until the powder
is dissolved.
Pour the mixture
into the water tank.
Fill the tank with filtered
water until it is half full.
Push and hold the Decaf
Coffee
button until "Insert
Cleanser"
appears
on
the display.
Push Decaf
Coffee
again to immediately
start the cleaning
cycle. If
the Decaf
Coffee
button is not pushed
again, the cleaning
cycle will
automatically
start in about 20 seconds.
The cleaning
process
takes about
10 minutes.
The coffee maker will turn off and on several
times during the
process.
V'_en
"Machine
Ready"
appears
on the display,
the cleaning
process
is
done.
9.
Push the Hot Water
button to clean out the water dispenser.
Wait until water
stops coming out of the dispenser.
10. Repeat step 9, four more times.
11. Flush the residual
detergent
out of the system
(see below).
FLUSHING OUT THE COFFEE MAKER
[]
Iii
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
III
A.
g.
C,
D.
E.
If your unit is equipped
with a water tank, remove
it from the
unit. Empty it and rinse it out with filtered
water.
Fill the vv-ater
tank with filtered
,water until full and put it back in the unit.
With an empty
2-quart
saucepan
on the drip tray to catch
the rinse water,
push and hold the Decaf
Coffee
button until
"Insert
Cleanser"
appears
on the display.
Push the Decaf
Coffee
button again to immediately
start
rinsing
out the unit. Note that if the Decaf
Coffee
button is
not pressed
again, the rinse will automatically
start in about
20 seconds.
The rinse process
takes about
10 minutes.
The
coffee maker will turn off and on several
times during the
process.
V'_en
the final rinse is complete,
the display will read "Machine
Ready".
Push the Hot Water
button to rinse out the water dispenser.
Wait until water
stops coming out of the dispenser.
F.
Repeat step E, four more times.

Advertisement

This manual also for:

Icon e24cm76gss

Comments to this Manuals

Symbols: 0
Latest comments: