Download  Print this page

Advertisement

Care & Cleaning
37
Decalcification
for Model E24CM76GSS (Plumbed
Version) with a
generic or no filter system
1.
For Model
E24CM76GSS
to be decalcified,
the water line must be in an
accessible
location.
The type of fittings and hoses required
to connect
it
depend
on the type of installation.
2.
Use an Electrolux
ACCFILT-24
filter kit and an Electrolux
ACCKITA-24
flushing
cartridge.
3.
When
the coffee system
is pulled out all the way, there is approximately
a
three inch space to reach behind.
4.
Turn off the water supply to the coffee system
and pull it out from the cabinet.
5.
Push the Hot Water
button. Wait for the water to stop. Repeat this process
twice to remove
air.
Hot
Water
.
,
.
.
Remove
the divider
insert from the
flushing
cartridge
with a small screw
driver.
Dissolve
one packet of Puly
Decalcifying
Powder
in 12 ounces
of
warm water.
Use a measuring
cup.
Fill the flushing
cartridge
with solution
and top it off with water.
Reinstall
the
divider
insert.
Install the flushing
cartridge
into the
filter head. Keep it upright so no water
runs out.
10. Disconnect
the far end of the water
hose that connects
to the coffee
maker from the water supply.
11. Connect
the hose to the filter head
outlet (see the arrow on the head)
12. Connect
the house water supply to
the inlet on the filter head.
13. Turn on the water supply.

Advertisement

This manual also for:

Icon e24cm76gss

Comments to this Manuals

Symbols: 0
Latest comments: