Download  Print this page

Advertisement

Care and Cleaning
29
I
[]
m
I
[]
[]
I
I
m
m
[]
I
[]
i
I
m
I
I
[]
I
!
[]
ADJUSTING THE COFFEE GRINDER
The mesh of the coffee grinder
blades
is pre-set
at the factory.
Adjust
the grinder
blades only if the quality of the coffee changes.
The finer the coffee
is ground,
the
stronger
it will be.
WARNING
Coffee
will
pour into
a cup you put under the coffee
dispenser
tube
during
the adjustment
process.
To avoid
burns,
keep body
parts
and
clothing
clear
of the dispenser
and drip tray areas.
Do not attempt
to adjust
the grinder
when
the grinder
is not on.
Damage
to the grinder
blades
may occur.
The grinder
is adjusted
while it is running,
using the adjustment
wrench
supplied
with your coffee
maker.
1.
Open the front panel and brewing
unit doors. See page 27.
2.
Install the drip tray on the floor of the brewing
compartment
and put a coffee
cup under the coffee dispenser.
3.
Pull out the white button on the back of the front panel
4.
Insert the grinder
adjustment
tool into the end of the grinder
adjustment
screw.
5,
,
.
8.
Turn on the power switch and wait for "Machine
Ready"
to appear
on the
display.
Push the Double
Espresso
button and turn the grinder adjustment
wrench
while you hear the grinder
motor running,
according
to the label next to it.
Stop turning
it when the grinder
motor stops. To continue
adjusting,
push the
Double
Espresso
button again.
Experiment
with the setting
until the coffee
is suitable
strength.
Remove
the drip tray.
Close the front panel according
to the
directions
on page 27.

Advertisement

This manual also for:

Icon e24cm76gss

Comments to this Manuals

Symbols: 0
Latest comments: