Download  Print this page

Advertisement

14
Getting Started
PREPARING FOR INSTALLATION
[]
[]
[]
[]
[]
[]
[]
!i
[]
[]
[]
[]
[]
[]
Ii
[]
[]
[]
[]
[]
[]
[]
Before Installing Your Coffee Maker...
1.
Call your local water company.
Ask them for the water hardness
level of the
water supplied
to the building
where your coffee
maker will be installed.
2.
If the water hardness
level is above four grains per gallon (4 gpg):
<> If you are installing
model
E24CM76GSS
(plumbed
model),
contact
a water
treatment
specialist
and have a water treatment
system
installed
to reduce
the water
hardness
level to 4 gpg or less.
If you are installing
model
E24CM75GSS
(tank model),
pour only filtered
water with a hardness
level of 4 gpg or less into the water tank. DO NOT
use distilled
water.
.
,
Have a licensed
electrician
install a dedicated,
grounded
power
receptacle
near the coffee
maker,
if one is not available.
Have a qualified
installer
install the coffee
maker in the desired
location
according
to the accompanying
installation
instructions.
After Installing Your Coffee Maker...
1.
Slide the coffee maker out and remove the keys taped to the side.
IMPORTANT
The warranty
on your coffee maker does
not cover lost keys. Putyour
keys in a
safe place.

Advertisement

This manual also for:

Icon e24cm76gss

Comments to this Manuals

Symbols: 0
Latest comments: