Toavoid e lectric shock, disconnect
the test l eads from any
source ofvoltage before removing
the battery door.
the test l eads from the meter.
rubber boot (ifinstalled).---_-_
3. Open the battery door b y loosening
the screw u sing a
Phillips head s crewdriver.
4. Insert the batteries
into battery holder, observing
5. Put t he battery door back i nplace. Secure with the two
To avoid electric shock, do not operate the meter until the
battery door is in place and fastened securely.
NOTE: If your meter does not work properly, check the fuses and batteries
to make sure that they are still good and that they are properly inserted.