Download  Print this page

Craftsman 17539 - 6.0 Amp Plate Jointer Operator's Manual Page 13

Double insulated.
Hide thumbs

Advertisement

FENCE HEIGHT
The adjustable fence on the biscuit joiner can be moved
up or down to adjust the position of the blade in relation
to the top of the workpiece. A scale on each side of the
fence indicates the height of the fence from the center of
the blade. The fence can be positioned up to two inches
from the center of the blade. However, the scale and indi-
cator point can only be set up to 2 in. from the center of
the blade. Scale marks are in increments of 1/16 in.
SETTING
THE FENCE HEIGHT
See Figure 7.
Unplug the biscuit joiner.
Loosen the locking knob approximately
one turn.
Move the fence up or down by rotating the height
adjustment knob until the indicator point is aligned with
the desired dimension on the scale.
Tighten the locking knob securely.
INDICATOR HEIGHTSETTING
POINT
SCALE
HEIGHT
ADJUSTMENT
KNOB
TO LOWER
TO RAISE
TIGHTEN
FENCE ANGLE
The adjustable fence on the biscuit joiner can be set at
angles ranging from 0 ° to 135 °, with accurate positive
stops set in 45 ° increments. A scale is located on each
side of the front handle for identifying these positive stop
angles. Each stop reached when rotating the adjustable
fence from one angle setting to another equals a 45 ° posi-
tive stop angle change.
SETTING
THE FENCE ANGLE
See Figure 8.
Unplug the biscuit joiner.
Loosen the locking knob approximately
one turn.
Rotate the fence to the desired angle.
Tighten the locking knob securely.
ROTATE ADJUSTABLE FENCE
TO DESIRED ANGLESETTING
TOTIGHTEN_
LOOSEN
Fig. 8
ADJUSTABLE
FENCE
ANGLESETTING
SCALE
LOCKING
KNOB
Fig. 7
13

Advertisement

   Related Manuals for Craftsman 17539 - 6.0 Amp Plate Jointer

This manual also for:

315.175390

Comments to this Manuals

Symbols: 0
Latest comments: