This product requires assembly.
Carefully remove the tool and any accessories from the
box. Make sure that all items listed in the packing list
Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.
Do not discard the packing material until you have
carefully inspected and satisfactorily
operated the tool.
If any parts are damaged or missing, please call
#10 Biscuits (20)
If any parts are missing do not operate
this tool until the missing parts are replaced. Failure
to do so could result in possible serious personal
Do not attempt to modify this tool
or create accessories not recommended
with this tool. Any such alteration or modification
misuse and could result in a hazardous condition
leading to possible serious personal injury.
Do not connect to power supply until
assembly is complete. Failure to comply could result
in accidental starting and possible serious injury.
THE DUST BAG
See Figure 2.
The dust bag located on the rear of the biscuit joiner pro-
vides a dust collection system. Wood particles are drawn up
through the base and collect in the dust bag during cutting
operations. For more efficient operation, empty the dust bag
when half full.
To install, slide the dust bag adaptor onto the dust port on
the biscuit joiner. To remove the dust bag, grasp the adaptor
and pull the dust bag away from the biscuit joiner.
TO A VACUUM
See Figure 3.
The dust collection system of your biscuit joiner has a
1-1/4 in. port for inserting a vacuum hose.
Unplug the biscuit joiner.
Remove the dust bag.
Attach a vacuum hose to the dust port.
Connect the biscuit joiner and the vacuum to a power
When the tool is not connected to
vacuum, always reinstall the dust bag back onto the
tool. Failure to do so could cause dust or foreign ob-
jects to be thrown into your face or eyes which could
result in possible serious injury.