This saw has been lubricated at the factory prior to
shipment. Following extended use, you should inspect
and lubricate the following areas to assure smooth
See Figure 61.
Add dry lube between both bevel gears, the
backup washers and the locker bracket.
Add dry tube between threaded hole in motor
casting and threaded elevating shaft.
Dry Silicone or Teflon Lubricant
TILT / ELEVATING
See Figure 62.
Add dry lube between the handle shaft and the
bore of the clamping bolt.
Add dry tube between the face of the clamping bolt
and the face of the handle shaft.
Add dry lube on the inner surfaces of the bevel
locking lever which contacts the cam.