Owner’s Manual CORDLESS IMPACT WRENCH 1/2" Drive 18 Volt High Performance Impact Wrench Model No. 310.26825 • Safety • Operation • Maintenance • Parts • Español, p.15 CAUTION: Before using this product, read this manual and follow all its Safety Rules and Operating Instructions.
PARTS ... 14 ESPAÑOL ... 15 FULL ONE YEAR WARRANTY If this Craftsman professional cordless impact wrench fails due to a defect in material or workmanship within one year from the date of purchase, Sears will repair it, free of charge.
GENERAL SAFETY RULES WARNING :Read and understand all instructions. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury. SAVE THESE INSTRUCTIONS Work Area Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents.
DEFINITIONS DANGER: Failure to obey a safety warning will result in serious injury to you or to others. Always follow the safety precautions to reduce the risk of fire, electric shock and personal injury. WARNING: Failure to obey a safety warming can result in serious injury to you or to others.
SPECIFIC SAFETY RULES AND SYMBOLS Additional Rules For Safe Operation Know your power tool. Read operator’s manual carefully. Learn its applications and limitations, as well as the specific potential hazards related to this tool. Following this rule will reduce the risk of electric shock, fire, or serious injury.
Important Rules for Battery Tools Battery tools do not have to be plugged into an electrical outlet; therefore, they are always in operating condition. Be aware of possible hazards when not using your battery tool or when changing accessories. Following this rule will reduce the risk of electric shock, fire, or serious personal injury.
a.That pins on plug of extension cord are the same number, size and shape as those of plug on charger. b.That extension cord is properly wired and in good electrical condition; and c.That wire size is large enough for AC ampere rating of charger as specified below: Cord Length (Feet) 25’...
Type or a Current characteristic of current APPLICATION The Craftsman Impact Wrench is ideal for a wide variety of fastener turning jobs in both automotive and industrial fields. When used with impact sockets, it provides power and speed for greater job efficiency and less operator fatigue.
SWITCH LOCK The switch trigger can be locked in OFF position. This feature helps reduce the possibility of accidental starting when not in use. VARIABLE SPEED This tool has variable speed switch that delivers higher speed with increased trigger pressure. Speed is controlled by the amount of switch trigger depression.
• Lock the switch trigger by placing FORWARD/REVERSE SELECTOR in the center position. • Depress latch located on front of battery pack (1) to release battery pack. • Pull forward on battery pack (2) to remove from impact wrench. WARNING: If any parts are missing, do not operate your impact wrench until the missing...
• When your battery pack becomes fully charged, the red light will turn OFF and the green light will turn ON. • A minimum charge time of 1-1/2 hours is required to recharge a completely discharged battery. • The battery pack will become slightly warm to the touch while charging.
Product Specifications Craftsman Impact Wrench Model 310.26825 Motor voltage 18 VDC Square drive size 1/2" Tightening torque* 180 ft. lb. Sound pressure level** 96 dbA Sound power level 109 dbA Vibration Level*** 5.5 m/sec Free speed 0–2200 RPM Impact per minute...
To obtain the longest possible battery life, we suggest the following: • Store and charge your batteries in a cool area. Temperatures above normal room temperature will shorten battery life. • Never store batteries in a discharged condition. Recharge them immediately after they are discharged.
Craftsman 1/2" Professional Cordless Impact Wrench The model number will be found on a plate attached to the motor housing. Always mention the model number in all correspondence regarding your CRAFTSMAN 1/2" PROFESSIONAL CORDLESS IMPACT WRENCH or when ordering repair parts.